Powered by Invision Power Board


Seiten: (2) 1 [2]  ( Zum ersten neuen Beitrag
 
Reply to this topicStart new topicStart Poll

> vdr schaltet nicht ab
kaminkehrer
Geschrieben am: Montag, 19.Februar 2018, 12:55 Uhr
Quote Post


Professional
****

Gruppe: Supporter
Beiträge: 1094
Mitgliedsnummer.: 300
Mitglied seit: 2004-02-08



Hallo Helmut,

das es an nfs liegt weiß ich.
Ich muß aber NFS nutzen weil:

Samba:
Wenn ich im Wohnzimmer (vdrmb2) einen Film aufnehme und diesen Zeitversetzt im Schlafzimmer schauen möchte, dann unterbricht das Abspielen immer an dem Punkt wo die Aufnahme gerade war als ich das abspielen gestartet habe.

Mit NFS gibt es diese Unterbrechung nicht und ich kann den Film in Ruhe zusende schauen.

Aus diesem Grund nutze ich NFS, da sonst das verteilte schauen nicht einwandfrei funktioniert.

Von daher suche ich eine Lösung um NFS vernünftig zu "unmounten".

Wie kann ich den die Reihenfolge des VDR beenden und unmount ändern.

Für mich ist Samba aus dem obigen Grund keine Alternative.

Grüße
kaminkehrer
Email Poster
Top
HelAu
Geschrieben am: Montag, 19.Februar 2018, 15:50 Uhr
Quote Post


Scheffe
****

Gruppe: Admin
Beiträge: 11085
Mitgliedsnummer.: 2
Mitglied seit: 2003-04-25



Tausche mal in der /_config/bin/vdrshutdown.sh
Ganz am Ende das beenden von local und vdr, also aus
CODE
if [[ "$STOP_VDR" = "1" ]]; then
  /etc/init.d/local stop
  /etc/init.d/vdr stop
fi
$SHUTDOWN_CMD

machst Du
CODE
if [[ "$STOP_VDR" = "1" ]]; then
  /etc/init.d/vdr stop
  /etc/init.d/local stop
fi
$SHUTDOWN_CMD
Email PosterUsers WebsiteICQAOLYahoo
Top
kaminkehrer
Geschrieben am: Donnerstag, 22.Februar 2018, 14:42 Uhr
Quote Post


Professional
****

Gruppe: Supporter
Beiträge: 1094
Mitgliedsnummer.: 300
Mitglied seit: 2004-02-08



Hallo Helmut,

das hilft leider noch nicht:

Grüße
kaminkehrer

angehängte Datei ( Anzahl der Downloads: 31 )
angehängte Datei  g2v_log_02221440.tar.xz
Email Poster
Top
kaminkehrer
Geschrieben am: Donnerstag, 22.Februar 2018, 14:43 Uhr
Quote Post


Professional
****

Gruppe: Supporter
Beiträge: 1094
Mitgliedsnummer.: 300
Mitglied seit: 2004-02-08



CODE
Feb 21 22:20:01 vdrmb1 syslog-ng[3445]: Configuration reload request received, reloading configuration;
Feb 21 22:20:01 vdrmb1 run-crons[5651]: (root) CMD (/etc/cron.daily/makewhatis)
Feb 21 22:20:02 vdrmb1 run-crons[5701]: (root) CMD (/etc/cron.daily/mlocate)
Feb 21 22:20:58 vdrmb1 vdr[3676]: video:  2:46:57.655  +41  295   0/\ms  62+3+4 v-buf
Feb 21 22:21:50 vdrmb1 vdr[3676]: [4533] [softhddev]FeedKeyPress: remote 'XKeySym' not found
Feb 21 22:21:50 vdrmb1 vdr[3676]: [3676] [softhddev]CreateOsd: 58, 32, 0
Feb 21 22:21:50 vdrmb1 vdr[3676]: [3676] skinflatplus: create osd SUCCESS left: 58 top: 32 width: 1800 height: 1015
Feb 21 22:21:50 vdrmb1 vdr[3676]: [3676] [softhddev]CreateOsd: 58, 32, 0
Feb 21 22:21:50 vdrmb1 vdr[3676]: audio/alsa: broken driver 4 state 'RUNNING'
Feb 21 22:21:50 vdrmb1 vdr[3676]: [3676] skinflatplus: create osd SUCCESS left: 58 top: 32 width: 1800 height: 1015
Feb 21 22:21:50 vdrmb1 vdr[3676]: audio/alsa: broken driver 0 state 'RUNNING'
Feb 21 22:21:50 vdrmb1 vdr[3676]: [3676] switching to channel 2 (ZDF HD)
Feb 21 22:21:50 vdrmb1 vdr[3676]: [3676] [softhddev]SetPlayMode: 0
Feb 21 22:21:50 vdrmb1 vdr[3676]: [3676] [softhddev]SetVideoDisplayFormat: 0
Feb 21 22:21:50 vdrmb1 vdr[3676]: [3676] [softhddev]GetSpuDecoder:
Feb 21 22:21:50 vdrmb1 vdr[3676]: [4531] osdteletext-receiver thread ended (pid=3676, tid=4531)
Feb 21 22:21:50 vdrmb1 vdr[3676]: [3676] buffer stats: 0 (0%) used
Feb 21 22:21:50 vdrmb1 vdr[3676]: [4532] device 1 TS buffer thread ended (pid=3676, tid=4532)
Feb 21 22:21:50 vdrmb1 vdr[3676]: [4530] buffer stats: 222216 (4%) used
Feb 21 22:21:50 vdrmb1 vdr[3676]: [4530] device 1 receiver thread ended (pid=3676, tid=4530)
Feb 21 22:21:50 vdrmb1 vdr[3676]: [6011] device 1 receiver thread started (pid=3676, tid=6011, prio=high)
Feb 21 22:21:50 vdrmb1 vdr[3676]: [3676] creating directory /tmp/osdteletext/S19.2E-1-1011-11110
Feb 21 22:21:50 vdrmb1 vdr[3676]: [6013] osdteletext-receiver thread started (pid=3676, tid=6013, prio=high)
Feb 21 22:21:50 vdrmb1 vdr[3676]: [6012] device 1 TS buffer thread started (pid=3676, tid=6012, prio=high)
Feb 21 22:21:51 vdrmb1 vdr[3676]: [3676] DvbapiInfoDraw
Feb 21 22:21:51 vdrmb1 vdr[3676]: [3676] DvbapiInfoDraw
Feb 21 22:21:51 vdrmb1 vdr[3676]: [3676] [softhddev]SetPlayMode: 1
Feb 21 22:21:51 vdrmb1 vdr[3676]: audio/alsa: using device 'default'
Feb 21 22:21:51 vdrmb1 vdr[3676]: audio/alsa: start delay 336ms
Feb 21 22:21:51 vdrmb1 vdr[3676]: [3676] DvbapiInfoDraw
Feb 21 22:21:52 vdrmb1 vdr[3676]: video/vdpau: missed frame (3/4)
Feb 21 22:21:52 vdrmb1 vdr[3676]: video/vdpau: missed frame (4/4)
Feb 21 22:21:52 vdrmb1 vdr[3676]: video: slow down video, duping frame
Feb 21 22:21:52 vdrmb1 vdr[3676]: video: 19:07:59.044 +117  518   0/\ms  37+4+4 v-buf
Feb 21 22:21:52 vdrmb1 vdr[3676]: video/vdpau: synced after 31 frames
Feb 21 22:21:53 vdrmb1 vdr[3676]: [3676] DvbapiInfoDraw
Feb 21 22:21:53 vdrmb1 vdr[3676]: [3676] DvbapiInfoDraw
Feb 21 22:21:54 vdrmb1 vdr[3676]: [3676] DvbapiInfoDraw
Feb 21 22:21:55 vdrmb1 vdr[3676]: [3676] DvbapiInfoDraw
Feb 21 22:21:56 vdrmb1 vdr[3676]: [3676] DvbapiInfoDraw
Feb 21 22:21:56 vdrmb1 vdr[3676]: [3676] DvbapiInfoDraw
Feb 21 22:21:58 vdrmb1 vdr[3676]: [3676] DvbapiInfoDraw
Feb 21 22:21:58 vdrmb1 vdr[3676]: [3676] switching to channel 3 (RTL Television)
Feb 21 22:21:58 vdrmb1 vdr[3676]: [3676] [softhddev]SetPlayMode: 0
Feb 21 22:21:58 vdrmb1 vdr[3676]: [3676] [softhddev]SetVideoDisplayFormat: 0
Feb 21 22:21:58 vdrmb1 vdr[3676]: [3676] [softhddev]GetSpuDecoder:
Feb 21 22:21:58 vdrmb1 vdr[3676]: [6013] osdteletext-receiver thread ended (pid=3676, tid=6013)
Feb 21 22:21:58 vdrmb1 vdr[3676]: [3676] buffer stats: 0 (0%) used
Feb 21 22:21:58 vdrmb1 vdr[3676]: [6012] device 1 TS buffer thread ended (pid=3676, tid=6012)
Feb 21 22:21:58 vdrmb1 vdr[3676]: [6011] buffer stats: 238384 (4%) used
Feb 21 22:21:58 vdrmb1 vdr[3676]: [6011] device 1 receiver thread ended (pid=3676, tid=6011)
Feb 21 22:21:58 vdrmb1 vdr[3676]: [6028] device 1 receiver thread started (pid=3676, tid=6028, prio=high)
Feb 21 22:21:58 vdrmb1 vdr[3676]: [3676] creating directory /tmp/osdteletext/S19.2E-1-1089-12003
Feb 21 22:21:58 vdrmb1 vdr[3676]: [6029] osdteletext-receiver thread started (pid=3676, tid=6029, prio=high)
Feb 21 22:21:58 vdrmb1 vdr[3676]: [6030] device 1 TS buffer thread started (pid=3676, tid=6030, prio=high)
Feb 21 22:21:58 vdrmb1 vdr[3676]: [3676] DvbapiInfoDraw
Feb 21 22:21:58 vdrmb1 vdr[3676]: [3676] [softhddev]SetPlayMode: 1
Feb 21 22:21:58 vdrmb1 vdr[3676]: audio/alsa: using device 'default'
Feb 21 22:21:58 vdrmb1 vdr[3676]: video: slow down video, duping frame
Feb 21 22:21:58 vdrmb1 vdr[3676]: video: decoder buffer empty, duping frame (8/316) 0 v-buf
Feb 21 22:21:58 vdrmb1 vdr[3676]: video: --:--:--.---   +0    0   0/\ms   0+1+4 v-buf
Feb 21 22:21:58 vdrmb1 vdr[3676]: audio/alsa: start delay 336ms
Feb 21 22:21:59 vdrmb1 vdr[3676]: [3676] DvbapiInfoDraw
Feb 21 22:21:59 vdrmb1 vdr[3676]: video: decoder buffer empty, duping frame (13/316) 2 v-buf
Feb 21 22:21:59 vdrmb1 vdr[3676]: video/vdpau: missed frame (5/2)
Feb 21 22:21:59 vdrmb1 vdr[3676]: audio/alsa: broken driver 0 state 'RUNNING'
Feb 21 22:21:59 vdrmb1 vdr[3676]: video: slow down video, duping frame
Feb 21 22:21:59 vdrmb1 vdr[3676]: video: 15:24:49.920 +119  367   0/\ms   6+8+4 v-buf
Feb 21 22:21:59 vdrmb1 vdr[3676]: video/vdpau: synced after 35 frames
Feb 21 22:22:00 vdrmb1 vdr[3676]: [3676] DvbapiInfoDraw
Feb 21 22:22:00 vdrmb1 vdr[3676]: [3676] DvbapiInfoDraw
Feb 21 22:22:02 vdrmb1 vdr[3676]: [3676] DvbapiInfoDraw
Feb 21 22:22:02 vdrmb1 vdr[3676]: [3676] DvbapiInfoDraw
Feb 21 22:22:03 vdrmb1 vdr[3676]: [3676] DvbapiInfoDraw
Feb 21 22:22:03 vdrmb1 vdr[3676]: [3676] DvbapiInfoDraw
Feb 21 22:22:05 vdrmb1 vdr[3676]: [3676] DvbapiInfoDraw
Feb 21 22:22:05 vdrmb1 vdr[3676]: [3676] DvbapiInfoDraw
Feb 21 22:22:15 vdrmb1 kernel: nfs: server vdrmb2 not responding, still trying
Feb 21 22:22:59 vdrmb1 vdr[3676]: video: slow down video, duping frame
Feb 21 22:22:59 vdrmb1 vdr[3676]: video: 15:25:49.320  +19  339   0/\ms   9+7+4 v-buf
Feb 21 22:23:06 vdrmb1 vdr[3676]: audio/alsa: broken driver 4 state 'RUNNING'
Feb 21 22:23:46 vdrmb1 vdr[3676]: [6334] epg data writer thread started (pid=3676, tid=6334, prio=low)
Feb 21 22:23:47 vdrmb1 vdr[3676]: [6334] epg data writer thread ended (pid=3676, tid=6334)
Feb 21 22:23:59 vdrmb1 vdr[3676]: video: 15:26:49.320  +19  411   0/\ms   8+7+4 v-buf
Feb 21 22:24:59 vdrmb1 vdr[3676]: video: 15:27:49.320  +19  410   0/\ms   7+7+4 v-buf
Feb 21 22:25:59 vdrmb1 vdr[3676]: video: 15:28:49.320  +19  315   0/\ms   9+7+4 v-buf
Feb 21 22:26:45 vdrmb1 kernel: nfs: server vdrmb2 not responding, still trying
Feb 21 22:26:47 vdrmb1 vdr[3676]: [softhddev] empty video packet 11 bytes
Feb 21 22:26:59 vdrmb1 vdr[3676]: video: 15:29:49.320  +19  411   0/\ms  18+7+4 v-buf
Feb 21 22:27:01 vdrmb1 vdr[3676]: audio/alsa: broken driver 4 state 'RUNNING'
Feb 21 22:27:05 vdrmb1 vdr[3676]: audio/alsa: broken driver 4 state 'RUNNING'
Feb 21 22:27:59 vdrmb1 vdr[3676]: video: 15:30:49.320  +19  339   0/\ms   9+7+4 v-buf
Feb 21 22:28:59 vdrmb1 vdr[3676]: video: 15:31:49.320  +19  339   0/\ms  11+7+4 v-buf
Feb 21 22:29:59 vdrmb1 vdr[3676]: video: 15:32:49.320  +19  363   0/\ms   6+7+4 v-buf
Feb 21 22:30:01 vdrmb1 cron[7348]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons)
Feb 21 22:30:59 vdrmb1 vdr[3676]: video: 15:33:49.320  +19  387   0/\ms  10+7+4 v-buf
Feb 21 22:31:59 vdrmb1 vdr[3676]: video: 15:34:49.320  +19  315   0/\ms   9+7+4 v-buf
Feb 21 22:32:59 vdrmb1 vdr[3676]: video: 15:35:49.320  +19  315   0/\ms   9+7+4 v-buf
Feb 21 22:33:47 vdrmb1 vdr[3676]: [7985] epg data writer thread started (pid=3676, tid=7985, prio=low)
Feb 21 22:33:48 vdrmb1 vdr[3676]: [7985] epg data writer thread ended (pid=3676, tid=7985)
Feb 21 22:33:59 vdrmb1 vdr[3676]: video: 15:36:49.320  +19  363   0/\ms   9+7+4 v-buf
Feb 21 22:34:43 vdrmb1 vdr[3676]: audio/alsa: broken driver 4 state 'RUNNING'
Feb 21 22:34:59 vdrmb1 vdr[3676]: video: 15:37:49.320  +19  291   0/\ms   6+7+4 v-buf
Feb 21 22:35:55 vdrmb1 vdr[3676]: audio/alsa: broken driver 4 state 'RUNNING'
Feb 21 22:35:59 vdrmb1 vdr[3676]: video: 15:38:49.320  +19  315   0/\ms  10+7+4 v-buf
Feb 21 22:36:59 vdrmb1 vdr[3676]: video: 15:39:49.320  +19  291   0/\ms  13+7+4 v-buf
Feb 21 22:37:59 vdrmb1 vdr[3676]: video: 15:40:49.320  +19  315   0/\ms  14+7+4 v-buf
Feb 21 22:38:37 vdrmb1 vdr[3676]: audio/alsa: broken driver 4 state 'RUNNING'
Feb 21 22:38:59 vdrmb1 vdr[3676]: video: 15:41:49.320  +19  363   0/\ms  12+7+4 v-buf
Feb 21 22:39:59 vdrmb1 vdr[3676]: video: 15:42:49.320  +19  387   0/\ms  12+7+4 v-buf
Feb 21 22:40:01 vdrmb1 cron[8999]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons)
Feb 21 22:40:22 vdrmb1 vdr[3676]: audio/alsa: broken driver 4 state 'RUNNING'
Feb 21 22:40:59 vdrmb1 vdr[3676]: video: 15:43:49.320  +19  387   0/\ms  12+7+4 v-buf
Feb 21 22:41:18 vdrmb1 vdr[3676]: audio/alsa: broken driver 4 state 'RUNNING'
Feb 21 22:41:59 vdrmb1 vdr[3676]: video: 15:44:49.320  +19  315   0/\ms   8+7+4 v-buf
Feb 21 22:42:59 vdrmb1 vdr[3676]: video: 15:45:49.320  +19  387   0/\ms  12+7+4 v-buf
Feb 21 22:43:00 vdrmb1 vdr[3676]: [4454] EPGSearch: timer conflict check started
Feb 21 22:43:00 vdrmb1 vdr[3676]: [4454] EPGSearch: timer conflict check finished
Feb 21 22:43:05 vdrmb1 vdr[3676]: audio/alsa: broken driver 4 state 'RUNNING'
Feb 21 22:43:48 vdrmb1 vdr[3676]: [9647] epg data writer thread started (pid=3676, tid=9647, prio=low)
Feb 21 22:43:49 vdrmb1 vdr[3676]: [9647] epg data writer thread ended (pid=3676, tid=9647)
Feb 21 22:43:59 vdrmb1 vdr[3676]: video: 15:46:49.320  +19  387   0/\ms   8+7+4 v-buf
Feb 21 22:44:59 vdrmb1 vdr[3676]: video: 15:47:49.320  +19  339   0/\ms   6+7+4 v-buf
Feb 21 22:45:59 vdrmb1 vdr[3676]: video: 15:48:49.320  +19  363   0/\ms   7+7+4 v-buf
Feb 21 22:46:39 vdrmb1 vdr[3676]: audio/alsa: broken driver 4 state 'RUNNING'
Feb 21 22:46:48 vdrmb1 vdr[3676]: audio/alsa: broken driver 4 state 'RUNNING'
Feb 21 22:46:59 vdrmb1 vdr[3676]: video: 15:49:49.320  +19  339   0/\ms   6+7+4 v-buf
Feb 21 22:47:29 vdrmb1 vdr[3676]: audio/alsa: broken driver 4 state 'RUNNING'
Feb 21 22:47:59 vdrmb1 vdr[3676]: video: 15:50:49.320  +19  363   0/\ms   6+7+4 v-buf
Feb 21 22:48:59 vdrmb1 vdr[3676]: video: 15:51:49.320  +19  339   0/\ms   7+7+4 v-buf
Feb 21 22:49:23 vdrmb1 vdr[3676]: audio/alsa: broken driver 4 state 'RUNNING'
Feb 21 22:49:59 vdrmb1 vdr[3676]: video: 15:52:49.320  +19  387   0/\ms   6+7+4 v-buf
Feb 21 22:50:01 vdrmb1 cron[10657]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons)
Feb 21 22:50:06 vdrmb1 vdr[3676]: audio/alsa: broken driver 4 state 'RUNNING'
Feb 21 22:50:08 vdrmb1 vdr[3676]: audio/alsa: broken driver 4 state 'RUNNING'
Feb 21 22:50:59 vdrmb1 vdr[3676]: video: 15:53:49.320  +19  363   0/\ms   9+7+4 v-buf
Feb 21 22:51:59 vdrmb1 vdr[3676]: video: 15:54:49.320  +19  291   0/\ms  16+7+4 v-buf
Feb 21 22:52:59 vdrmb1 vdr[3676]: video: 15:55:49.320  +19  339   0/\ms  11+7+4 v-buf
Feb 21 22:53:49 vdrmb1 vdr[3676]: [11297] epg data writer thread started (pid=3676, tid=11297, prio=low)
Feb 21 22:53:50 vdrmb1 vdr[3676]: [11297] epg data writer thread ended (pid=3676, tid=11297)
Feb 21 22:53:59 vdrmb1 vdr[3676]: video: 15:56:49.320  +19  291   0/\ms   7+7+4 v-buf
Feb 21 22:54:52 vdrmb1 vdr[3676]: audio/alsa: broken driver 4 state 'RUNNING'
Feb 21 22:54:59 vdrmb1 vdr[3676]: video: 15:57:49.320  +19  363   0/\ms  12+7+4 v-buf
Feb 21 22:55:42 vdrmb1 vdr[3676]: audio/alsa: broken driver 4 state 'RUNNING'
Feb 21 22:55:45 vdrmb1 vdr[3676]: audio/alsa: broken driver 4 state 'RUNNING'
Feb 21 22:55:47 vdrmb1 vdr[3676]: audio/alsa: broken driver 4 state 'RUNNING'
Feb 21 22:55:51 vdrmb1 vdr[3676]: audio/alsa: broken driver 4 state 'RUNNING'
Feb 21 22:55:59 vdrmb1 vdr[3676]: video: 15:58:49.320  +19  315   0/\ms   8+7+4 v-buf
Feb 21 22:56:59 vdrmb1 vdr[3676]: video: 15:59:49.320  +19  315   0/\ms   5+7+4 v-buf
Feb 21 22:57:59 vdrmb1 vdr[3676]: video: 16:00:49.320  +19  291   0/\ms   6+7+4 v-buf
Feb 21 22:58:59 vdrmb1 vdr[3676]: video: 16:01:49.320  +19  267   0/\ms  10+7+4 v-buf
Feb 21 22:59:01 vdrmb1 cron[12144]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly)
Feb 21 22:59:29 vdrmb1 G2V_12220_3721[12223]: /_config/bin/powerb.sh Script starts
Feb 21 22:59:29 vdrmb1 G2V_12220_3721[12227]: /_config/bin/powerb.sh Starte </usr/bin/svdrpsend.sh HITK power>
Feb 21 22:59:29 vdrmb1 G2V_12220_3721[12230]: /_config/bin/powerb.sh Script ends
Feb 21 22:59:29 vdrmb1 root[12233]: Starte svdrpsend HITK power
Feb 21 22:59:29 vdrmb1 vdr[3676]: [3676] connect from 127.0.0.1, port 39846 - accepted
Feb 21 22:59:29 vdrmb1 vdr[3676]: [3676] Power button pressed
Feb 21 22:59:29 vdrmb1 vdr[3676]: [3676] confirm: Taste drücken, um Ausschalten abzubrechen
Feb 21 22:59:29 vdrmb1 vdr[3676]: [3676] warning: Taste drücken, um Ausschalten abzubrechen
Feb 21 22:59:30 vdrmb1 vdr[3676]: [3676] [softhddev]CreateOsd: 58, 32, 0
Feb 21 22:59:30 vdrmb1 vdr[3676]: [3676] skinflatplus: create osd SUCCESS left: 58 top: 32 width: 1800 height: 1015
Feb 21 22:59:30 vdrmb1 vdr[3676]: [3676] closing SVDRP connection
Feb 21 22:59:30 vdrmb1 root[12239]: 220 vdrmb1 SVDRP VideoDiskRecorder 2.2.0; Wed Feb 21 22:59:29 2018; UTF-8 250 Key "power" accepted 221 vdrmb1 closing connection
Feb 21 22:59:36 vdrmb1 vdr[3676]: [3676] confirmed
Feb 21 22:59:36 vdrmb1 vdr[3676]: [3676] executing '/_config/bin/vdrshutdown 0 0 0 "" 1'
Feb 21 22:59:36 vdrmb1 vdr[3676]: [3676] saved setup to /etc/vdr/setup.conf
Feb 21 22:59:36 vdrmb1 vdr[3676]: [3676] max. latency time 6 seconds
Feb 21 22:59:36 vdrmb1 G2V_12255_1[12258]: /_config/bin/vdrshutdown Script starts
Feb 21 22:59:36 vdrmb1 root[12259]: 0 0 0  1
Feb 21 22:59:36 vdrmb1 G2V_12262_12261[12265]: /_config/bin/vdrshutdown.sh Script starts
Feb 21 22:59:36 vdrmb1 G2V_12262_12261[12267]: /_config/bin/vdrshutdown.sh /_config/bin/vdrshutdown.sh -0-
Feb 21 22:59:36 vdrmb1 G2V_12262_12261[12296]: /_config/bin/vdrshutdown.sh svdrpsend MESG System wird heruntergefahren
Feb 21 22:59:36 vdrmb1 root[12298]: Starte svdrpsend MESG System wird heruntergefahren
Feb 21 22:59:36 vdrmb1 root[12302]: dbus-send --system --type=method_call --dest=de.tvdr.vdr --print-reply /Skin de.tvdr.vdr.skin.QueueMessage "string:System wird heruntergefahren" - Error org.freedesktop.DBus.Error.ServiceUnknown: The name de.tvdr.vdr was not provided by any .service files
Feb 21 22:59:38 vdrmb1 G2V_12262_12261[12334]: /_config/bin/vdrshutdown.sh svdrpsend MESG System wird heruntergefahren
Feb 21 22:59:38 vdrmb1 vdr[3676]: video: speed up video, droping frame
Feb 21 22:59:38 vdrmb1 vdr[3676]: video: 16:02:28.680  -39  280   0/\ms   8+6+2 v-buf
Feb 21 22:59:38 vdrmb1 root[12336]: Starte svdrpsend MESG System wird heruntergefahren
Feb 21 22:59:38 vdrmb1 root[12340]: dbus-send --system --type=method_call --dest=de.tvdr.vdr --print-reply /Skin de.tvdr.vdr.skin.QueueMessage "string:System wird heruntergefahren" - Error org.freedesktop.DBus.Error.ServiceUnknown: The name de.tvdr.vdr was not provided by any .service files
Feb 21 22:59:38 vdrmb1 G2V_12262_12261[12341]: /_config/bin/vdrshutdown.sh Shutting down: <shutdown -h now>
Feb 21 22:59:38 vdrmb1 vdr[3676]: video/vdpau: missed frame (6/112950)
Feb 21 22:59:38 vdrmb1 G2V_12342_12262[12345]: /_config/bin/activy_lcdtimer.sh Script starts
Feb 21 22:59:38 vdrmb1 G2V_12342_12262[12350]: /_config/bin/activy_lcdtimer.sh svdrpsend PLUG alcd LOCK
Feb 21 22:59:38 vdrmb1 root[12352]: Starte svdrpsend PLUG alcd LOCK
Feb 21 22:59:39 vdrmb1 vdr[3676]: [3676] connect from 127.0.0.1, port 39848 - accepted
Feb 21 22:59:39 vdrmb1 vdr[3676]: [3676] closing SVDRP connection
Feb 21 22:59:39 vdrmb1 root[12361]: 220 vdrmb1 SVDRP VideoDiskRecorder 2.2.0; Wed Feb 21 22:59:39 2018; UTF-8 900 Display is locked 221 vdrmb1 closing connection
Feb 21 22:59:39 vdrmb1 G2V_12342_12262[12362]: /_config/bin/activy_lcdtimer.sh svdrpsend PLUG alcd PWRLED BLINK
Feb 21 22:59:39 vdrmb1 root[12364]: Starte svdrpsend PLUG alcd PWRLED BLINK
Feb 21 22:59:40 vdrmb1 vdr[3676]: [3676] connect from 127.0.0.1, port 39850 - accepted
Feb 21 22:59:40 vdrmb1 vdr[3676]: [3676] closing SVDRP connection
Feb 21 22:59:40 vdrmb1 root[12374]: 220 vdrmb1 SVDRP VideoDiskRecorder 2.2.0; Wed Feb 21 22:59:40 2018; UTF-8 900 PWRLED set 221 vdrmb1 closing connection
Feb 21 22:59:40 vdrmb1 G2V_12342_12262[12375]: /_config/bin/activy_lcdtimer.sh Script ends
Feb 21 22:59:40 vdrmb1 /etc/init.d/vdr[12378]: WARNING: you are stopping a boot service
Feb 21 22:59:41 vdrmb1 vdr[3676]: [3676] connect from 127.0.0.1, port 39852 - accepted
Feb 21 22:59:41 vdrmb1 vdr[3676]: [3676] closing SVDRP connection
Feb 21 22:59:41 vdrmb1 G2V_3562_1[12403]: /etc/vdr/runvdr Script ends
Feb 21 22:59:42 vdrmb1 vdr[3676]: [3676] confirm: Taste drücken, um Neustart abzubrechen
Feb 21 22:59:42 vdrmb1 vdr[3676]: [3676] warning: Taste drücken, um Neustart abzubrechen
Feb 21 22:59:42 vdrmb1 vdr[3676]: [3676] [softhddev]CreateOsd: 58, 32, 0
Feb 21 22:59:42 vdrmb1 vdr[3676]: [3676] skinflatplus: create osd SUCCESS left: 58 top: 32 width: 1800 height: 1015
Feb 21 22:59:43 vdrmb1 vdr[3676]: [3676] confirmed
Feb 21 22:59:43 vdrmb1 vdr[3676]: [3676] stopping plugin: softhddevice
Feb 21 22:59:43 vdrmb1 vdr[3676]: [3676] stopping plugin: alcd
Feb 21 22:59:43 vdrmb1 vdr[3676]: [3676] stopping plugin: skinflatplus
Feb 21 22:59:43 vdrmb1 vdr[3676]: [3676] stopping plugin: tvguide
Feb 21 22:59:43 vdrmb1 vdr[3676]: [3676] stopping plugin: iptv
Feb 21 22:59:43 vdrmb1 vdr[3676]: [3676] stopping plugin: admin
Feb 21 22:59:43 vdrmb1 vdr[3676]: [3676] stopping plugin: epgtableid0
Feb 21 22:59:43 vdrmb1 vdr[3676]: [3676] stopping plugin: live
Feb 21 22:59:43 vdrmb1 vdr[3676]: [3676] stopping plugin: epgsearch
Feb 21 22:59:43 vdrmb1 vdr[3676]: [3676] stopping plugin: osdteletext
Feb 21 22:59:43 vdrmb1 vdr[3676]: [6029] osdteletext-receiver thread ended (pid=3676, tid=6029)
Feb 21 22:59:43 vdrmb1 vdr[3676]: [3676] buffer stats: 0 (0%) used
Feb 21 22:59:43 vdrmb1 vdr[3676]: [3676] [softhddev]SetPlayMode: 0
Feb 21 22:59:43 vdrmb1 vdr[3676]: [3676] [softhddev]SetVideoDisplayFormat: 0
Feb 21 22:59:43 vdrmb1 vdr[3676]: [3676] [softhddev]GetSpuDecoder:
Feb 21 22:59:43 vdrmb1 vdr[3676]: [4529] KBD remote control thread ended (pid=3676, tid=4529)
Feb 21 22:59:43 vdrmb1 vdr[3676]: [6030] device 1 TS buffer thread ended (pid=3676, tid=6030)
Feb 21 22:59:43 vdrmb1 vdr[3676]: [6028] buffer stats: 113928 (2%) used
Feb 21 22:59:43 vdrmb1 vdr[3676]: [6028] device 1 receiver thread ended (pid=3676, tid=6028)
Feb 21 22:59:43 vdrmb1 vdr[3676]: [3676] saved setup to /etc/vdr/setup.conf
Feb 21 22:59:43 vdrmb1 vdr[3676]: [3814] device 1 section handler thread ended (pid=3676, tid=3814)
Feb 21 22:59:43 vdrmb1 vdr[3676]: [3813] frontend 0/0 tuner thread ended (pid=3676, tid=3813)
Feb 21 22:59:44 vdrmb1 vdr[3676]: video: decoder buffer empty, duping frame (19/113230) 0 v-buf
Feb 21 22:59:44 vdrmb1 vdr[3676]: video: --:--:--.---   +0    0   0/\ms   0+5+4 v-buf
Feb 21 22:59:44 vdrmb1 vdr[3676]: [3863] device 3 section handler thread ended (pid=3676, tid=3863)
Feb 21 22:59:44 vdrmb1 vdr[3676]: [3862] IPTV section handler thread ended (pid=3676, tid=3862)
Feb 21 22:59:44 vdrmb1 vdr[3676]: [3676] deleting plugin: softhddevice
Feb 21 22:59:44 vdrmb1 vdr[3676]: [3676] deleting plugin: alcd
Feb 21 22:59:44 vdrmb1 vdr[3676]: [3676] deleting plugin: skinflatplus
Feb 21 22:59:44 vdrmb1 vdr[3676]: [3676] deleting plugin: tvguide
Feb 21 22:59:44 vdrmb1 vdr[3676]: [3676] deleting plugin: iptv
Feb 21 22:59:44 vdrmb1 vdr[3676]: [3676] deleting plugin: admin
Feb 21 22:59:44 vdrmb1 vdr[3676]: [3676] deleting plugin: epgtableid0
Feb 21 22:59:44 vdrmb1 vdr[3676]: [3676] deleting plugin: live
Feb 21 22:59:44 vdrmb1 vdr[3676]: [3676] deleting plugin: epgsearch
Feb 21 22:59:44 vdrmb1 vdr[3676]: [4454] EPGSearch: Leaving conflict check thread
Feb 21 22:59:44 vdrmb1 vdr[3676]: [4454] EPGSearch: conflictcheck thread ended (pid=3676, tid=4454)
Feb 21 22:59:44 vdrmb1 vdr[3676]: [3676] deleting plugin: osdteletext
Feb 21 22:59:45 vdrmb1 vdr[3676]: [3676] max. latency time 6 seconds
Feb 21 22:59:45 vdrmb1 vdr[3676]: [3676] caught signal 1
Feb 21 22:59:45 vdrmb1 vdr[3676]: [3676] exiting, exit code 1
Feb 21 22:59:48 vdrmb1 vdr[3676]: [3676] ERROR: video directory scanner thread 4617 won't end (waited 3 seconds) - canceling it...
Feb 21 22:59:50 vdrmb1 su[4110]: pam_unix(su:session): session closed for user root
Feb 21 22:59:50 vdrmb1 G2V_4080_4075[12473]: /_config/bin/gg_startapp.sh Script ends
Feb 21 22:59:51 vdrmb1 shutdown[12512]: shutting down for system halt
Feb 21 22:59:51 vdrmb1 G2V_12504_12502[12513]: /_config/bin/g2v_exit.sh Script starts
Feb 21 22:59:51 vdrmb1 init[1]: Switching to runlevel: 0
Feb 21 22:59:51 vdrmb1 G2V_12515_12504[12521]: /_config/bin/check_noad.sh Script starts
Feb 21 22:59:51 vdrmb1 G2V_12515_12504[12523]: /_config/bin/check_noad.sh Script ends
Feb 21 22:59:51 vdrmb1 root[12535]: Unmounting <vdrmb2:/video on /mnt/vdrmb2/video type nfs (rw,intr,addr=192.168.178.20)>
Feb 21 22:59:52 vdrmb1 sshd[4350]: Received signal 15; terminating.
Feb 21 22:59:53 vdrmb1 rpc.mountd[4254]: Caught signal 15, un-registering and exiting.
Feb 21 22:59:53 vdrmb1 kernel: nfsd: last server has exited, flushing export cache
Feb 21 22:59:55 vdrmb1 G2V_13041_13036[13046]: /_config/bin/gg_setsofthdd.sh Script starts
Feb 21 22:59:55 vdrmb1 G2V_13041_13036[13061]: /_config/bin/gg_setsofthdd.sh Script ends
Feb 21 22:59:56 vdrmb1 G2V_3752_3750[13319]: /_config/bin/g2v_automount.sh Script ends
Feb 21 22:59:56 vdrmb1 G2V_3755_3753[13325]: /_config/bin/g2v_netmount.sh Script ends
Feb 21 22:59:57 vdrmb1 acpid[3721]: exiting
Feb 21 22:59:57 vdrmb1 syslog-ng[3445]: syslog-ng shutting down; version='3.7.3'
Email Poster
Top
HelAu
Geschrieben am: Donnerstag, 22.Februar 2018, 15:48 Uhr
Quote Post


Scheffe
****

Gruppe: Admin
Beiträge: 11085
Mitgliedsnummer.: 2
Mitglied seit: 2003-04-25



Dann liegts jetzt aber nicht mehr am NFS mount.
Ich befürchte dass da irgendein Treiber das Ausschalten verhindert, oder es gar am BIOS in Verbindung mit dem kernel liegt.
Du hast ja ne ngene drinne. Teste es mal mit und ohne
shutdown_workaround
und ebenso mal mit und ohne pci=nomsi in der lilo.conf (danach muss lilo ausgeführt werden)
Email PosterUsers WebsiteICQAOLYahoo
Top
kaminkehrer
Geschrieben am: Montag, 05.März 2018, 17:27 Uhr
Quote Post


Professional
****

Gruppe: Supporter
Beiträge: 1094
Mitgliedsnummer.: 300
Mitglied seit: 2004-02-08



Hallo Helmut,

es funktioniert.

DANKE!

Grüße
kaminkehrer
Email Poster
Top
HelAu
Geschrieben am: Dienstag, 06.März 2018, 08:36 Uhr
Quote Post


Scheffe
****

Gruppe: Admin
Beiträge: 11085
Mitgliedsnummer.: 2
Mitglied seit: 2003-04-25



QUOTE (kaminkehrer @ Montag, 05.März 2018, 18:27 Uhr)
Hallo Helmut,

es funktioniert.

DANKE!

Grüße
kaminkehrer

Weisst Du auch was genau das Problem behoben hat ?
Email PosterUsers WebsiteICQAOLYahoo
Top
kaminkehrer
Geschrieben am: Mittwoch, 07.März 2018, 15:56 Uhr
Quote Post


Professional
****

Gruppe: Supporter
Beiträge: 1094
Mitgliedsnummer.: 300
Mitglied seit: 2004-02-08



Hi Helmut,

CODE
if [[ "$STOP_VDR" = "1" ]]; then
 /etc/init.d/vdr stop
 /etc/init.d/local stop
fi
$SHUTDOWN_CMD


und

CODE
/_config/bin/module-update.sh args ngene "shutdown_workaround=1"


und

CODE
ohne pci=nomsi


Viele Grüße
kaminkehrer
Email Poster
Top
Thema wird von 1 Benutzer(n) gelesen (1 Gäste und 0 Anonyme Benutzer)
0 Mitglieder:

Topic OptionsSeiten: (2) 1 [2]  Reply to this topicStart new topicStart Poll